Classical Vee Belts

Gates Hi-Power11 Classical Vee Belt

Classical Section Vee Belts - 63% profile

Angle 38° 

Z section   10mm top width x  6mm deep        [For pulleys under  60mm diameters use a cogged  ZX section belt]

A section   13mm top width x  8mm deep        [For pulleys under  85mm diameters use a cogged  AX section belt]

B section   17mm top width x 11mm deep       [For pulleys under 112mm diameters use a cogged BX section belt]

C section   22mm top width x 14mm deep       [For pulleys under 160mm diameters use a cogged CX section belt]

D section   32mm top width x 19mm deep       [ Minimum pulley diameter 300mm]

E section   38mm top width x 25mm deep       [ Minimum pulley diameter 500mm]

Narrow Cross sectional belts  76% profile - 

Gates Super HC - Wrapped - These belts are able to transmit up to 3x the power as a classical belt

within the same drive space.

3V    10mm top width x  8mm deep        [For pulleys under 71mm diameter use a cogged 3VX section belt]

5V    17mm top width x 13mm deep       [For pulleys under 112mm diameter use a cogged 5VX section belt]

8V    26mm top width x 23mm deep       [88% profile - For pulleys under 315mm use a cogged 8VX section belt]