3/3VX
Gates Super HC® 3/3VX Powerband Vee Belts
| Belt Numbers | Outside Length | Top Width |
| 3/3VX250 | 630 mm [25"] | 10 mm |
| 3/3VX265 | 670 mm [26.5"] | 10 mm |
| 3/3VX280 | 710 mm [28"] | 10 mm |
| 3/3VX300 | 762 mm [30"] | 10 mm |
| 3/3VX355 | 901 mm [35.5"] | 10 mm |
| 3/3VX375 | 952 mm [37.5"] | 10 mm |
| 3/3VX400 | 1016 mm [40"] | 10 mm |
| 3/3VX450 | 1140 mm [45"] | 10 mm |
| 3/3VX475 | 1202 mm [47.5"] | 10 mm |
| 3/3VX560 | 1420 mm [56"] | 10 mm |
| 3/3VX600 | 1520 mm [60"] | 10 mm |
| 3/3VX630 | 1600 mm [63"] | 10 mm |
| 3/3VX670 | 1700 mm [67"] | 10 mm |
| 3/3VX750 | 1900 mm [75"] | 10 mm |
| 3/3VX800 | 2030 mm [80"] | 10 mm |
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC® Molded Notch Belts. These proprietary construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC® MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts. Developed through specialized research, Super HC® MN is highly recommended for use on all industrial heavy-duty, narrow section V-belt drives. With an increased transmission efficiency this belt allows for a more compact and highly economical drive design.
- Flex-bonded tensile cords are vulcanized as one solid unit making the belt highly resistant to tensile and flexing forces, fatigue and shock loads.
- Precision-ground straight sidewalls give a uniform wedging action and ensure the belt fits correctly in the pulley grooves.
- Molded Notches reduce and evenly distribute thermal and bending stresses
- Gates Super HC® 3/3VX Powerband Vee Belts are recommended for pulleys that have a diameter between 56-71 mm.
Scroll down for further information
↓
