5VX Powerbands
Gates Super HC® 5VX Powerband Vee Belts
| Belt Numbers | Outside Length | Top Width |
| 3/5VX500 | 1270 mm [50"] | 16 mm |
| 3/5VX530 | 1346 mm [53"] | 16 mm |
| 3/5VX560 | 1422 mm [56"] | 16 mm |
| 3/5VX600 | 1523 mm [60"] | 16 mm |
| 3/5VX630 | 1600 mm [63"] | 16 mm |
| 3/5VX670 | 1702 mm [67"] | 16 mm |
| 3/5VX710 | 1803 mm [71"] | 16 mm |
| 3/5VX800 | 2032 mm [80"] | 16 mm |
| 3/5VX850 | 2159 mm [85"] | 16 mm |
| 3/5VX900 | 2286 mm [90"] | 16 mm |
| 3/5VX1000 | 2540 mm [100"] | 16 mm |
| 3/5VX1060 | 2692 mm [106"] | 16 mm |
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC® Molded Notch Belts. These proprietary construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC® MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts. Developed through specialized research, Super HC® MN is highly recommended for use on all industrial heavy-duty, narrow section V-belt drives. With an increased transmission efficiency this belt allows for a more compact and highly economical drive design.
- Flex-bonded tensile cords are vulcanized as one solid unit making the belt highly resistant to tensile and flexing forces, fatigue and shock loads.
- Precision-ground straight sidewalls give a uniform wedging action and ensure the belt fits correctly in the pulley grooves.
- Molded Notches reduce and evenly distribute thermal and bending stresses.
- Gates Super HC® 5VX Powerband Vee Belts are recommended for pulleys that have a diameter between 112-160 mm.
Scroll down for further information
↓
