×

8VX

Gates Super HC® 8VX Vee Belt

 

        Belt Numbers          Outside Length       Top Width
     
8VX1000 2540 mm  [100"]  26 mm 
8VX1060  2694 mm  [106"]  26 mm 
8VX1120  2845 mm  [112"]  26 mm 
8VX1180  2997 mm  [118"]  26 mm 
8VX1250 3175 mm  [125"]  26 mm 
8VX1320  3356 mm  [132"]  26 mm 
8VX1400  3556 mm  [140"]  26 mm 
8VX1500  3810 mm  [150"]  26 mm 
8VX1600  4064 mm  [160"]  26 mm 
8VX1700 4318 mm  [170"]  26 mm 
8VX1800  4572 mm  [180"]  26 mm 
8VX1900  4826 mm  [190"]  26 mm 
     
     

 

When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC® Molded Notch Belts. These proprietary construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC® MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts. Developed through specialized research, Super HC® MN is highly recommended for use on all industrial heavy-duty, narrow section V-belt drives. With an increased transmission efficiency this belt allows for a more compact and highly economical drive design.

  • Flex-bonded tensile cords are vulcanized as one solid unit making the belt highly resistant to tensile and flexing forces, fatigue and shock loads.
  • Precision-ground straight sidewalls give a uniform wedging action and ensure the belt fits correctly in the pulley grooves.
  • Molded Notches reduce and evenly distribute thermal and bending stresses.
  • Gates Super HC® 8VX Vee Belts are recommended for pulleys that have a diameter of over 315 mm.

 

Scroll down for further information

We can't find products matching the selection.