4L Section [2 Series or 68 PoweRated]
Gates Fractional Horsepower 4L Section V Belts
Also known as 2 Series or 68 Powerated belts
| Belt Numbers | Outside Length | Top Width |
| 4L150 2150 | 381 mm [15"] | 13 mm |
| 4L160 2160 | 406 mm [16"] | 13 mm |
| 4L170 2170 | 432 mm [17"] | 13 mm |
| 4L180 2180 | 457 mm [18"] | 13 mm |
| 4L188 2188 | 478 mm [18.8"] | 13 mm |
| 4L190 2190 | 483 mm [19"] | 13 mm |
| 4L200 2200 | 508 mm [20"] | 13 mm |
| 4L210 2210 | 533 mm [21"] | 13 mm |
| 4L215 2215 | 546 mm [21.5"] | 13 mm |
| 4L220 2220 | 559 mm [22"] | 13 mm |
| 4L230 2230 | 584 mm [23"] | 13 mm |
Truflex® belts are engineered with superior length stability for minimal take-up requirements, perfect for all industrial, light-duty applications, including fractional horsepower (FHP) motors and applications using backside idlers. Flex-bonded cords are strongly secured to the belt’s body for equal load distribution and absorption of bending stress without cord deterioration. Gates Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life. The Flex-Weave® Cover is constructed for longer cover life, providing the belt's core with extended protection from oil, dirt, and heat.
- Meets RMA oil and heat-resistant standards and static conductivity requirements.
- Note: Truflex belts are offered in cross sections 2L (0), 3L (1 & 67), 4L (2 & 68), 5L (3 & 69).
- Runs with smooth, quiet operation.
- Minimum pulley diameter for 4L Section V- Belts: 64mm.
- Minimum flat backside pulley diameter for 4L section V-belts: 83mm
Scroll down for further information
↓
