AA Double Sided V-Belt
AA Gates Hi-Power® Dubl-V Belts
Belt Numbers | Outside Length | Top Width |
AA51 | 1384 mm [54.48"] | 13mm |
AA55 | 1485 mm [58.45"] | 13 mm |
AA60 | 1612 mm [63.47"] | 13 mm |
AA62 | 1663 mm [65.48"] | 13 mm |
AA64 | 1714 mm [67.47"] | 13 mm |
AA66 | 1765 mm [69.47"] | 13 mm |
AA68 | 1816 mm [71.48"] | 13 mm |
AA70 | 1866 mm [73.47"] | 13 mm |
AA73 | 1942 mm [76.47"] | 13 mm |
AA75 | 1993 mm [78.47"] | 13 mm |
AA85 | 2247 mm [88.47"] | 13 mm |
AA86 | 2273 mm [89.47"] | 13 mm |
AA88 | 2323 mm [91.47"] | 13 mm |
AA90 | 2374 mm [93.48"] | 13 mm |
AA92 | 2425 mm [95.47"] | 13 mm |
AA96 | 2527 mm [99.48"] | 13 mm |
AA105 | 2755 mm [108.45"] | 13 mm |
AA108 | 2862 mm [112.67"] | 13 mm |
AA111 | 2938 mm [115.07"] | 13 mm |
AA112 | 2933 mm [115.48"] | 13 mm |
AA120 | 3136 mm [123.48"] | 13 mm |
AA128 | 3340 mm [131.48"] | 13 mm |
AA148 | 3847 mm [151.47"] | 13 mm |
Gates® Hi-Power® Dubl-V belts are designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt. Use this Gates solution for all industrial serpentine applications that require rotation reversal on some driven shafts. It uses flex-bonded tensile cords, which are highly resistant to flexing forces, and a protective Flex-Weave® cover. It is the ideal solution for "serpentine" drives (drives with counter rotating shafts) where power is transmitted from both the top and the bottom of the belts.
- Gates curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life.
- Flex-Bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
Scroll down for further information
↓