2L Section [0 Series]
Gates Fractional Horsepower 2L Section V-Belts
Also known as O series V-belts
Belt Numbers | Outside Length | Top Width |
2L100 0100 | 254 mm [10"] | 6 mm |
2L110 0110 | 279 mm [11"] | 6 mm |
2L120 0120 | 305 mm [12"] | 6 mm |
2L130 0130 | 330 mm [13"] | 6 mm |
2L140 0140 | 355 mm [14"] | 6 mm |
2L150 0150 | 381 mm [15"] | 6 mm |
2L160 0160 | 406 mm [16"] | 6 mm |
2L170 0170 | 432 mm [17"] | 6 mm |
2L180 0180 | 457 mm [18"] | 6 mm |
2L190 0190 | 483 mm [19"] | 6 mm |
2L200 0200 | 508 mm [20"] | 6 mm |
2L210 0210 | 533 mm [21"] | 6 mm |
2L230 0230 | 584 mm [23"] | 6 mm |
2L240 0240 | 610 mm [24"] | 6 mm |
2L250 0250 | 635 mm [25"] | 6 mm |
2L260 0260 | 660 mm [26"] | 6 mm |
2L270 0270 | 686 mm [27"] | 6 mm |
2L280 0280 | 711 mm [28"] | 6 mm |
2L290 0290 | 737 mm [29"] | 6 mm |
2L310 0310 | 787 mm [31"] | 6 mm |
Truflex® belts are engineered with superior length stability for minimal take-up requirements, perfect for all industrial, light-duty applications, including fractional horsepower (FHP) motors and applications using backside idlers. Flex-bonded cords are strongly secured to the belt’s body for equal load distribution and absorption of bending stress without cord deterioration. Gates Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life. The Flex-Weave® Cover is constructed for longer cover life, providing the belt's core with extended protection from oil, dirt, and heat.
- Meets RMA oil and heat-resistant standards and static conductivity requirements.
- Note: Truflex belts are offered in cross sections 2L (0), 3L (1 & 67), 4L (2 & 68), 5L (3 & 69).
- Runs with smooth, quiet operation.
- Minimum Pulley sizes for 2L Section Vee Belts: 21mm outside diameter.
- Minimum size for flat backside idler pulley: 27mm
Scroll down for further information
↓