5L Section [3 Series or 69 PoweRated]
Gates Fractional Horsepower 5L Section V Belts
Also known as 3 Series or 69 PoweRated belts
Belt Numbers | Outside Length | Top Width |
5L230 3230 | 584 mm [23"] | 17 mm |
5L240 3240 | 610 mm [24"] | 17 mm |
5L250 3250 | 635 mm [25"] | 17 mm |
5L260 3260 | 660 mm [26"] | 17 mm |
5L270 3270 | 686 mm [27"] | 17 mm |
5L280 3280 | 711 mm [28"] | 17 mm |
5L290 3290 | 737 mm [29"] | 17 mm |
5L300 3300 | 762 mm [30"] | 17 mm |
5L310 3310 | 787 mm [31"] | 17 mm |
Truflex® belts are engineered with superior length stability for minimal take-up requirements, perfect for all industrial, light-duty applications, including fractional horsepower (FHP) motors and applications using backside idlers. Flex-bonded cords are strongly secured to the belt’s body for equal load distribution and absorption of bending stress without cord deterioration. Gates Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life. The Flex-Weave® Cover is constructed for longer cover life, providing the belt's core with extended protection from oil, dirt, and heat.
- Meets RMA oil and heat-resistant standards and static conductivity requirements.
- Note: Truflex belts are offered in cross sections 2L (0), 3L (1 & 67), 4L (2 & 68), 5L (3 & 69).
- Runs with smooth, quiet operation.
- Minimum diameter pulley for 5L Section V-belt: 89mm.
- Minimum diameter flat backside pulley for 5L Section V-belt: 116mm.
Scroll down for further information
↓